Dave;A high pressure Air-Oil circuit normally uses air-oil tanks for fast approach and retract at low (air) pressure and an Air-Oil Intensifier for the high pressure work stroke. Air pressure forces oil from the air-oil tanks into the cylinder fo
I agree with what Bud says above; however, I would like to add a couple things.The most common circuit uses an oil reservoir connected into the pressure side of the intensifier. Commonly, there is either a pressure switch or a position limit swit
I agree with what Bud says above; however, I would like to add a couple things.The most common circuit uses an oil reservoir connected into the pressure side of the intensifier. Commonly, there is either a pressure switch or a position limit swit
.
