Connecting My Valve

ANVER

Home Forums Connecting My Valve

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #21832
    admin
    Participant

    Sure, I think this will help. The ports can be identified as follows:1: pressure in or supply2: return or normally open cylinder port (you should feel air coming from this port when there is no electrical signal)3: exhaust (connects to the #2 por

    #21833
    admin
    Participant

    I should have read the rest of your post before jumping into the technical stuff. You can purchase items from JointAir.Com. However, I would like to understand your application first. Please e-mail me. Also, the above information is based on an

    #21834
    admin
    Participant

    Thank you for the information. I tested the valve and it seems to work perfectly. The manufacturer is ARO and the model number is A212SS024D. I screwed plugs to ports 2 and 4. This seemed to work. I sent you an email. Can you tell me what I

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.