hydraulically piloted 3/2 pneumatic valve

ANVER

Home Forums hydraulically piloted 3/2 pneumatic valve

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #21786
    admin
    Participant

    There is no reason you can’t use a standard pilot operated pneumatic valve for this application. You need to make sure the oil is compatable with the seals in the valve and that you are not exceeding the pressure of the valve.In it’s most basic f

    #21787
    admin
    Participant

    NeilIs this valve to actuate at a preset pressure or any time above zero? My firm until last year manufactured a snap acting pneumatic switches that could operate in different input ranges from 3 psi to 400 psi. They worked very well but slow sal

    #21788
    admin
    Participant

    Try this sitewww.doering.comThey have some in 2-way and 3-way but say the 3-way is only for air. Worth asking about your application.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.