One illusive valve….

- This topic has 5 replies, 1 voice, and was last updated 4 years, 4 months ago by .
Viewing 5 posts - 1 through 5 (of 5 total)
Viewing 5 posts - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
Try caontacting Parker Hannifen
As a general rule that I’ve heard, 1 Cv = 25 SCFM so for 65 your looking at over 2 Cv. The max pressure should not be problem with most companies. 150 psi is typical but they usually have specials that go to 300 psi. Energizing in
The valve will be used to actuate a cylinder on my senior thesis project. It’s going on a robot with a lot of weight and space restrictions. Hence I’m looking for a really small, cheap (read: poor college student), high pressure, high flow, and
cylinder will be launching a 120lb BODY”?!?!?!?! Sounds like fun
n response to your questions Joe,1) Contact the University of Cincinnati to apply to my school :)2) The landing is in my area, but not my problem. It’s more like my goal. The harder the landing the better actually. The body” is a 120 lb enemy”