[admin]

Sir,Visit my web site ecvinc.com and pick a valve and controller and we’ll show you how to position a cylinder. The 800 series will yield about 5 ips no load with 80 psig air.

[admin]

Hi Chris,Tescom is a pretty good bet, but this one may be more compact, not sure, worth a try.http://www.midland-pneu.com/pages/_main/3500_series_info_4_main.htmMidland PneumaticsI have them, but not to that pressure. Midland does make them to 20

[admin]

i get alot of may for this lubricator

[admin]

If in Australia contact Compair 1800 634 077tel.Ask for pneumatic sales.

[admin]

Sirs/Madam,We are a trading company located in Malaysia and I have received an enquiry for a 10mm serta pneumatic coupling which is urgently needed.I would like to know if you have any local agent here or what are the information required before I

[admin]

Sehr geehrte Frau Cherkessova,ich habe Interesse an Ihren Produkten. Bitte um Ihre Telefonnummer.

[admin]

Dear Sir, We can provide it. Atul 09313889290

[admin]

Shaun;You need a Normally Open (Normally Passing)(Time Off Delay)timer to do what I think you want to do. You would give it a signal to the timer port and the inlet port at the same time (From the same signal). The signal would immediately pass th

[admin]

You can get both normally open and normally closed timers from KV Ltd.www.kvglobal.com

[admin]

With the products I am familiar with, you can use a 2/2 normally closed valve with a time in/out sequence adaptor. You would have air to the inlet of the valve. When you provided the pilot signal, the time in adaptor would delay for the preset t

[admin]

Hello.Please e-mail me at airman_sam@hotmail.comI am an engineering consultant and I design pneumatic systems. I would like for you to mail me catalogs for your product.Once you e-mail me, I will provide my mailing address.Best regards.

[admin]

please email me edward@mwfts.com website: http://www.mwfts.com

[admin]

Try This Company Andrews Tool Co. P.O. Box 121464 Arlington, TX 76012 USA

[admin]

Mark;If you want to do this with air alone get with your local Festo, Herion or SMC distributor and use their Proportional air valves. That is the only way you will consistently stop and air cylinder under plus or minus a 1/2.If you don’t want to”

[admin]

Thank you Bud. Do you mean to say that even with using linear pots as position indicators the system won’t be able to be accurate?

[Author]

Posts