Davelfc64
Forum Replies Created
- AuthorPosts
adminParticipantAlkon makes a spool valve specifically for air suspensions…one of ours will replace two of the ones you want for less money.
adminParticipantODE is distributed by Granzow in the US.www.granzow.comRegards.
adminParticipantI would be happy to be of assistance. I am the sales person for Granzow Inc. that handles the ODE solenoid valve line in the US. Please contact me at morten@granzow.com or 704-845-2300.
adminParticipantimi norgren buschjostwith kind regardsimi norgren
adminParticipantimi norgren buschjostwith kind regardsimi norgren
adminParticipanti need ur main catalog & iwant to know about ur distributors in south asia
adminParticipantReneTry Metal Work Pneumatics, series bit 1/4G and 1/8G
adminParticipantHello Rene!Hoerbiger produces G1/4 and G1/8 units in plastics. If you need further help please contact me.
adminParticipantA 5/2 bi-stable valve is a double pilot valve. It maintains the state or last pilot actuated. These valves only need a momentary pulse to the opposing pilot to change state or shift. Make sure you get the switching times from the manufacturer to
adminParticipantTry the search page here. Click the search button on the top of the main page and type in air motors in the search box.
adminParticipantI am a student at NCSU doing a research project involving air motors. I have found limited manufacturors. I was wondering if anyone knew of companies that made them. Thanks, Troy
adminParticipantI have been thinking about this for a while. Putting a sensor directly on the roller would require the sensor to actuate every 0.02 seconds. This is beyond the limitations of the valves I looked up from Clippard. So I thought of a couple differ
adminParticipantWould you be able to add a ‘dog’ on a roller, that would contact a lever arm to a 3-way valve? If you could, you then could actuate a 3-way valve to give a signal out only when the roller is moving. The valve could have an ‘off-delay’ that would
adminParticipantHow about a Fan Blade on one roller with a shroud that points its air flow to an Crouzet or Telemechanique amplifier module that shifts ta under 1 PSI pressure and sends an 20-100 PSI signal to an air operated water valve. No contact but needs som
adminParticipantThe system is called air over oil, or air-oil. Most manufacturers make air-oil tanks. FabCo-Air in Gainesville FL is a great start. Using (2) 2 bore cylinders X 12″ stroke you have approximately 76 cubic inches of oil volume you need to fill.”
- AuthorPosts
