Davelfc64
Forum Replies Created
- AuthorPosts
adminParticipantPat;If you have MSWord 97 or higher I can send you a chapter out of a training book I use to teach Basic Fluid Power. It covers Air-Oil, Air Dash Pots, Air-Air and Air-Oil Intensifiers. There should be enough info to get you started.Bud
adminParticipantDear Sir,please quoute price and delivery time for air orhydraulic zylinder.Thats printed on the part:CPOACC12PRV63APG12101125KVSCMBJ 1969Thank you very much for your helpBest regards Juergen HaaseArea Sales Manager
adminParticipantSir, Contact me i will help you. Atul
adminParticipantCheck out Norgren s valves. Their ‘Super X’ range panel mounts tend to be supplied with sealing gaskets and are generally Brass/Plastic operating heads, so will not rust. http://www.norgren.com
adminParticipantSuggest you look at Fabco Air Products, they sell Multi-power cylinders, (cylinders with more than one piston)and Boosters which may be of help in your system by increasing pressure.
adminParticipantSuggest talking to Haskel Energies. They supply a wide range of pressure boosters that multiply the mains pressure by a predetermined ratio to suit the application. Please check that the pressure you require is within the tolerances of the cylin
adminParticipantGive SMC a call at 800-762-7621 and ask about their NVBA booster with a tank for what you need.Regards.
adminParticipantBooster,intensifier, Multi-Power cylinder…. There are many choices. I think the real issue is what pressure do you ultimately need? 100? 200? 800? You need to figure that out first. This will tell you if either is aplicable. Then you need t
adminParticipantMidwest Pressure Systems sells turnkey air pressure booster packages that should fit you application
adminParticipantYou can increase the pressure by pushing a smaller cylinder with your larger cylinder. If you have 60 psi & 4 cylinder
adminParticipantYes you can do this using an intensifier. The approximate ratio is 54:1. However, you want to use a higher ratio.This will be much more expensive than a hydraulic pump. It will also be very slow using your onboard compressor.
adminParticipantHello Matt.I graduated from Cal State, SanBernardino in 89. One thing to be aware of is that an air over oil system is not used to generate high hydraulic pressure with a pneumatic signal.All air over oil is is utilizing oil in a cylinder instead
December 7, 2020 at 11:03 am in reply to: what applications would require valve with high speed and dynamic range? #21559adminParticipantWhat do you mean dynamic range?” High speed applications… There are a few that come to mind:Rice sorting machinery. The rice is dropped down the end of a conveyor. As the rice falls
adminParticipantI have a link to low cost check valves and relief valves. Be sure your supplier has low cracking psi, like 0.5psi or it may not be reliable in your application. We can make special runs of combined function parts with sufficient quantities. 1-88
adminParticipantBe sure your supplier has low cracking psi, like 0.5psi or it may not be reliable in your application. I have a link to low cost check valves and relief valves. We can make special runs of combined function parts with sufficient quantities. 1-888-
- AuthorPosts
