[admin]

Are you sure you mean 3mm and not 4mm?

[admin]

Try Legri / ComozziIn Australia contact Compair.

[admin]

Check out Norgrens PneuFit C range. Norgren.com

[admin]

Try Ph:630-588-8488

[admin]

Try Motion Industries

[admin]

Several manufacturers produce valves which are in effect proportional. They produce a change in the ride height based on the position of the actuator arm.Physically they connect to the axle and to the frame of the vehicle or trailer. As the load

[admin]

We are a manufacturer in PA producing Air control kits for this type of application.Steerable or non steerable lift controls are typically our speciality.Most of in the case of trailer as opposed to Truck you would have a control box mounted out o

[admin]

quite simple,there is a valve in our range (Haldex 613 005 …) which is linked to the leaf spring, meassuring the spring deflection between empty and full laden condition. This (mm or inch) value is transformed inside the valve into pressure diff

[admin]

FLUIDAIRE CAN PROVIDE THIS CYLINDER. WE NEED MORE DETAILS.COST IS APPROX. 0CALL 502-339-8700

[admin]

Yes I have have learned a lot about pneumatic air lift kits for cars. Most of my online customers at JointAir.Com are building lowriders. Hydraulics is the choice medium for those who can afford it. It is my understanding that a hydraulic syste

[admin]

Alkon makes a pneumatic valve specifically designed for this market

[admin]

I am not familiar with IDN. However, I work with a lot of companies who supply cylinder valves. If you need any help finding a valve please contact me I am more than willing to help.

[admin]

don’t know

[admin]

There are a number of companies manufacturing halloween props. They are very simple devices. You should use a 5 port, 4 way valve with the appropriate voltage coil. I do not know what the voltage is in a door bell circuit.I assume you want to w

[admin]

hi Scott, You need a compressed air source.One cylinder,One double solenoid valve, two reed switches , one 3/2 valve.

[Author]

Posts