[admin]

URGENT REQUIREMENTS OF MAXAM PNEUMATIC CYLINDERS & SEAL KITS PLEASE SPECIFY INDIAN / ASIAn DISTRIBUTORS OF MAXAM PNEUMATICS UK IT’S VERY URGENT THANKS & REGARDSDILEEP SHIRSAT c.e.o.FLUID POWER CAREKorba (CG) Indiafpc_korba@sancharnet.influidpowerc

[admin]

Look at the following address for SMC series PF2A flow switch to 2 pipe and 15000 liters per minute sensing range;http://www.smcworld.com/2002/index3_e.htmGood luck!”

[admin]

From what I can see the one marked Correct Elbow” is definitely Legris but one of the original version. The newer part is called Second Generation in their catalog and there is even a Third Generation available. The “3” and “4” are probably mold”

[admin]

I don’t know Bud. The old Legris fittings from the Rochester, NY days were gray. I don’t recognize that mark either. I pulled out my old samples of their generation 1 fittings and they don’t match what I have.

[admin]

Hello.I have old Legris literature and what you have is a Legirs 1st generation push connect fitting.The body is gray and the collet is brass that requires a screwdriver to engage to release the tubing.Measure the OD (outer diameter) of your tubin

[admin]

These guys are building some pretty neat equipment. If you check their website http://www.gbprops.com, you can see what they are building. I’m not sure what they do exactly, but they are replicas of the Ghost Busters backpacks.Because they are building

[admin]

Say thanks for your help everyone! Yes, there can be no alternative for these, they have to be the grey ones from the 1980’s. It is still not known if these are actually legris, because several people say they aren’t. But just so you don’t get con

[admin]

Hi AJ,I agree with the earlier comments, the elbow does appear to be Legris, and appears to be 1/8 NPT.However, you may wish to look for their second generation product, because the earlier fittings tended to fail where the brass tube inserts and

[admin]

Forget sometimez what i have to say know what i meen.? I ben thnkn bout buying a Flr from Jionriar.com for and wonderl if qlautiy is good not.THe go tthe frl for udder .00 looks great. I want know if it works. I hafe clinder with 3 and half

[admin]

E-mail me directly. We can discuss the specifics about your application. I’m not sure I understand your application. Look forward to your reply

[admin]

Learn to spell

[admin]

Please provide more information about inexpensive. There are a number of niche manufacturers of predetermining counter and timer manufacturers. The problem is they are not inexpensive. Depending on your application, it may be easier to setup th

[admin]

Contact Clippard at http://www.clippard.comRegards.

[admin]

Try Control Line Equipment, they have an excellent counter

[admin]

Hi Dave Crouzet in france manufacture a nice unit but is expensive (cost NZ 0)The other company to try is Ellis-Khunk (USA)Please let me know if you find a low cost source as I have a client who could use 50 units approx per year.Regards frank

[Author]

Posts