Davelfc64
Forum Replies Created
- AuthorPosts
adminParticipantContact Norgren for Herion Products http://www.norgren.com
adminParticipantItem Specification Part number Qty Solenoid coil Pe 3.. 10bars,1/4, 1.5 W 24vdc 262208830500024 00 10 pcs We need quotation as soon as possible.. regard’s radityo
adminParticipantContact Norgren for Herion Products, http://www.norgren.com
adminParticipantContact Norgren for Martonair Products http://www.norgren.com
adminParticipantIf you still need help, contact pneumatics@boschrexroth-us.com. The Rexroth Mecman name has now changed to Bosch Rexroth.
adminParticipantWhat are the part numbers?
November 25, 2020 at 9:51 am in reply to: High speed ( less then 1 millisec) valves for grain sorting #20933adminParticipantPls. contact MAC valves distributor. There are 2 distributors in India. You can locate them at http://www.macvalves.com. Regards
November 25, 2020 at 9:51 am in reply to: High speed ( less then 1 millisec) valves for grain sorting #20934adminParticipantPlease send me a mail we can help you
November 25, 2020 at 9:52 am in reply to: supply solenoid valves from Chinese manufacture, supply solenoid valves from Chinese manufacture #20935adminParticipantWhat is the name and web address of your company?
November 25, 2020 at 9:52 am in reply to: supply solenoid valves from Chinese manufacture, supply solenoid valves from Chinese manufacture #20936adminParticipanthttp://www.kailing-cn.com Fenghua kailing Pnematic co.ltd
adminParticipantTwo different pressures will not mix in any planned ratio. The higher pressure will likely stop the lower pressure feed and could even back flow that feed if that is possible. You need some sort of flow control devices and flow meters to set up the desired flow ratio., Two different pressures will not mix in any planned ratio. The higher pressure will likely stop the lower pressure feed and could even back flow that feed if that is possible. You need some sort of flow control devices and flow meters to set up the desired flow ratio.
adminParticipantCan you add a Cyl-Check to the app? This would add the hydraulic control necessary to smooth the extend and retract motions.
adminParticipantNo ol is alowed in the environment this unit is operating in.
adminParticipantTry using a 5/3 ports open to exhaust valve with an external pilot supply for the solenoid and use a regulator on both exhaust ports to regulate the pressure to both sides of the piston. Also add flow conrtols to the cylinder. With a bit of tweaking that should do it.
adminParticipantI only have a single pilot opearted 5-way at present and need to keep it that way if possible since the control circuit is air also and alredy installed. Would the dual pressure inlets work with a 2 position spring return valve?
- AuthorPosts
