Davelfc64
Forum Replies Created
- AuthorPosts
- November 26, 2020 at 9:02 am in reply to: Pneumatic impulse wrench manufacturer is looking for distributors worldwide #21063
adminParticipantwould like to see information on your product line.
November 26, 2020 at 9:02 am in reply to: Pneumatic impulse wrench manufacturer is looking for distributors worldwide #21064adminParticipantBy , October 12, 2010 at 3:06 ammy first blog.online journal was with a site cealld Diary-X. That’s REALLY what blogs were before news outlets and others got a hold of them and saw an opportunity to turn it into a platform. Oh and let’s not talk about all the citizen journalists out there. Some spots are actually good and are pretty legit, but still I miss the days when blogs were about anonymous personal thoughts and the reader felt like the dirty voyeur. D-X was so anonymous. Only way ppl knew it was you is if you posted pictures and kept the diary open to the public. It was home, it was a comfort zone. Then the unthinkable happened. A server went down for the count and all the info the site owners had on some drive was destroyed. If you didn’t back up your ish.. your were ass’d out. I cried because my life from 2002 to early 2006 was on there and I lost the later portion; late 2005 to that early 2006 date. blog anniversaries are a bit of a fleeting thought, unless you are just that sentimental have wine and little debbie and a good cry.
November 26, 2020 at 9:03 am in reply to: Pneumatic impulse wrench manufacturer is looking for distributors worldwide #21065adminParticipantIt’s been a rough weekend(week). The smoren on Sunday really hurt to hear. The pastor was just trying to stir us up, but all the lies that I believe seemed to be confirmed throughout the whole smoren. First, he told us that we had to hear the word. No problem, but the second point was that we had to believe the word. That’s were I was feeling condemned. He said that if we don’t believe the word, we are sinning. No matter what everyone else says, you are sinning. I sat there and thought, yeah. That me. The big sinner. I don’t believe in my heart most of what the Bible says about God’s love and who I am in Christ. It was so painful. By the end of the service, I was screaming inside. I kept saying, I already know that I’m a complete failure. Do you have to keep rubbing it in that it means I’m a total sinner also? I haven’t started acting out yet because I’ve been too busy for work, but I’m already seeing a lot of red flags. My wife knows what’s going on, but I know I need to be able to work through this before I completely go crazy.
November 26, 2020 at 9:03 am in reply to: Question on flow control orientation and valve type #21068adminParticipantOne way to stop the motion of the clamps is to use a blocked center valve but remember that air is compressible and there will be some movement at the center position. Plus, there will be air trapped in the system which is a e-stop no-no. Try to
November 26, 2020 at 9:03 am in reply to: Question on flow control orientation and valve type #21069adminParticipantRick,The type of valve is dependent on the application. If you are attempting to hold the clamped position” then a closed center valve is best. However
November 26, 2020 at 9:04 am in reply to: I need some help with old Legris Fittings PLEASE HELP #21070adminParticipantYou should check with some of the long time Legris distributors to see what they have on the shelf. There is also a Taiwanese company making a very similar looking fitting.
adminParticipantBob;You can download a set of Fluid Power symbols from http://www.ifps.org from the Links site under For profit companies, HYDRA-PNEU CONSULTING. I don’t know if they work in VISIO but they do work in MSWord which has an extensive drawing program for any
adminParticipantBob;You can download a set of Fluid Power symbols from http://www.ifps.org from the Links site under For profit companies, HYDRA-PNEU CONSULTING. I don’t know if they work in VISIO but they do work in MSWord which has an extensive drawing program for any
adminParticipantPlease email brad.bardall@boschrexroth-us.com
adminParticipantGood Afternoon
adminParticipantGood Afternoon Rick I am replying from the UK. We are one of the Biggest suppliers of Bosch Pneumatics and Hydraulics in the UK. I am happy to quote you on the following. For a complete valve Part Number 0811404955 with the other components Total List Price £2941.00 (UK Sterling) Delivery 6-8weeks If you require any further information about carriage charges etc please do not hesitate to contact me. Best Regards Ian Simpson Sales Director
adminParticipantiam mechanical power engineering ,graduated from alexandria university in egypt with grade good at 2003
adminParticipantRM/8063/B/1600 SPA-12206 63mm Bore x 1600 stroke This is a very long stroke normal max stroke 10x bore.RM/8080/b/200 80mm Bore x 200 Stroke.All to ISO 6431RM/8020/20 20mm Bore x 20mm Stroke ISO Roundline ISO 6432.Hope this will help?Ian Ex Norgre
November 27, 2020 at 8:19 am in reply to: Looking for miniature high pressure solesoid valve. #21081adminParticipantTry FAS at, http://www.fas.ch
November 27, 2020 at 8:19 am in reply to: Looking for miniature high pressure solesoid valve. #21082adminParticipantFor a valve for this applicationcontact MAC Valves 1-800-MAC-VLVS
- AuthorPosts
